Product ID:ALBRO 850 FLUX
MSDS Date:05/01/1986
FSC:3439
NIIN:00N031716
MSDS Number: BPPWC

EUTECTIC CORP

40-40 172ND ST
FLUSHING, NY 11358-9981
US

Emergency Phone: 718-358-4000

Info Phone: 718-358-4000; 312-932-1210

Cage: 72271

EUTECTIC CORP

CHARLOTTE, NC 28273 US

Telephone: 704-527-9800/ 800-221-1433

Cage: 72271

LITHIUM CHLORIDE

CAS: 7447-41-8

RTECS: OJ5950000

OSHA PEL 1 MG/M3 (MFR)

ACGIH TLV: 1 MG/M3 (MFR)

ZINC CHLORIDE (SARA III)

CAS: 7646-85-7

RTECS: ZH1400000

OSHA PEL 1 MG/M3/2 STEL

ACGIH TLV: 1 MG/M3/2STEL FUME93

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

FLASH GOGGS, IF NEC, TO SHIELD OTHERS. AS A RULE,

RTECS: 9999999ZZ

TO NEXT LIGHTER SHADE WHICH GIVES SUFFICIENT VIEW OF

RTECS: 9999999ZZ

POTASSIUM BORATE; (POTASSIUM TETRABORATE)

CAS: 1332-77-0

BORON OXIDE; (BORIC ACID)

CAS: 1303-86-2

RTECS: ED7900000

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3; 9293

BORATE (1-), TETRAFLUORO-, POTASSIUM; (POTASSIUM

CAS: 14075-53-7

RTECS: ED2800000

OSHA PEL 2.5 MG/M3 AS F

ACGIH TLV: 2.5 MG/M3 AS F

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:FUMES & GASES CAN BE DANGEROUS TO YOUR
HEALTH. ACUTE:OVEREXPOSURE TO WELDING FUMES MAY RESULT IN
DISCOMFORT SUCH AS DIZZINESS, NAUSEA OR DRYNESS/IRRITATION OF NOSE,
THROAT OR EYES. ING 5: CHILLS, BREA THING DIFFICULTIES, FEVER,
COUGH, MUSCULAR PAIN, NAUSEA & VOMITING. RECOVERY GENERALLY
COMPLETE. CHRONIC:(EFT OF OVEREXP
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZ:OVEREXPOSURE MAY LEAD TO SIDEROSIS
(IRON DEPOSITS IN LUNGS) & MAY AFFECT PULMONARY FUNCTIONS. ARC RAYS
CAN INJURE EYES & BURN SKIN. ELECTRIC SHOCK CAN KILL. ING 5:SEVERE
& PROLONGED OVEREXPOS URE MAY CAUSE PULMONARY EDEMA & PNEUMONIA.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid:REMOVE TO WELL-VENTED AREA. CALL MD. EMPLOY FIRST-AID
TECHNIQUES RECOM BY AMERICAN RED CROSS. INGEST:CALL MD IMMEDIATELY
. INHAL:REMOVE TO FRESH AIR. SUPPORT BREATHING (GIVE O2/ ARTF RESP)
(FP N ). EYES:IMMEDIATELY FLUSH W/POTABLE WATER FOR A MINIMUM OF 15
MINUTES, SEEK ASSISTANCE FROM MD . SKIN:FLUSH W/COPIOUS AMOUNTS OF
WATER. CALL MD .

Flash Point:NON-FLAMMABLE
Extinguishing Media:MEDIA SUITABLE FOR SURROUNDING FIRE .
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:WELDING ARC & SPARKS & BRAZING FLAMES CAN
IGNITE COMBUSTIBLES & FLAMMABLES. REFER TO ANSI Z49.1 FOR FIRE
PREVENTION DURING USE OF WELDING & ALLIED PROCEDURES.

Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:READ & UNDERSTAND MFR'S INSTRUCTIONS &
PREC LBL ON PROD. TRAIN WORKER TO KEEP HIS HEAD OUT OF FUMES.
Other Precautions:WEAR HAND, HEAD & BODY PROT WHICH HELP TO PVNT INJURY
FROM RADIA, SPKS & ELEC SHOCK. SEE ANSI Z49.1. TRAIN WORKER NOT TO
TOUCH LIVE ELEC PARTS & TO INSULATE HIMSELF FROM WORK & GROUND.

Respiratory Protection:USE NIOSH/MSHA APPROVED RESPIRABLE FUME
RESPIRATOR OR AIR SUPPLIED RESPIRATOR WHEN WORKING IN CONFINED
SPACE/WHERE LOCAL EXHAUST/VENT DOES NOT KEEP EXPOSURE BELOW RECOM
EXPOSURE LIMIT.
Ventilation:USE ENOUGH GEN VENT & LOC EXHAUST AT ARC, OR BOTH, TO KEEP
FUMES & GASES FROM WORKER'S BRTHG ZONE & GEN AREA.
Protective Gloves:WELDER'S GLOVES.
Eye Protection:CHEM WORK GOGG/WEAR HELMET/USE (SUDPAT)
Other Protective Equipment:ARM PROTECTORS, APRONS, HATS, SHOULDER
PROTECTION, AS WELL AS DARK SUBSTANTIAL CLOTHING.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
HAZ DECOMP PROD:THOSE FROM BASE METAL & COATING, ETC, AS NOTED. REAS
EXPECTED CONSTITUENTS OF FUME WOULD INCL: FLUORIDES, COMPLEX OXIDES
OF IRON, COPPER & OTHER METALS LISTED. GASEOUS RXN PRODS MAY IN CL
CO & CO2. OZONE & NOX MAY BE FORMED BY RADIA FROM ARC. EYE
PROT:FCSHLD W/FILER LENS. PROVIDE PROT SCREENS & (ING 6)

HCC:N1
Appearance and Odor:NONE SPECIFIED BY MANUFACTURER.

Stability Indicator/Materials to Avoid:YES
NONE SPECIFIED BY MANUFACTURER.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:DECOMP PRODS OF NORM OPERATION INCL
THOSE ORIGINATING FROM VOLAT/RXN/OXIDATION OF MATLS SHOWN IN INGS
SECT, PLUS(SUPDAT)

Waste Disposal Methods:PREVENT WASTE FROM CONTAMINATING SURROUNDING
ENVIRONMENT. DISCARD ANY PRODUCT, RESIDUE, DISPOSABLE CONTAINER OR
LINER IN AN ENVIRONMENTALLY ACCEPTABLE MANNER IN FULL COMPLIANCE
W/FEDERAL, STATE & LOCA L REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.